looking for bed mat i think a deezee one would fit and tailgate liner for 2019 Ford Ranger. thank you | We have a couple options for your 2019 Ford Ranger. If your truck has a 5 foot bed, part # DZ87017 is going to work for you. If your truck...
How To Find The Correct Replacement Hardware Kit For Trailer Hitch
Dear etrailer, I recently bought a hitch and mounting kit for my 2014 Subaru crosstrek. During installation, I have broken both wire guides the ones that screw on the bolts and one of the plates that goes into the frame has an opening that...
Recommended Tailgate And Bed Mat For 2007 Ford Ranger
is theDZ86700 for just the bed of the Ford Ranger ? not the Tail Gate? | The DeeZee Universal Truck Tailgate Mat # DZ86700 is only for the tailgate and does not include the mat for the bed. This will work on your 2007 Ford Ranger as long as...
Load Bars for Retrax Pro XR on 2019 Ford Ranger
I have a 2019 Ford Ranger Crew Cab and have ordered a Retrax Pro XR cover. I like the Thule racks but was wondering if I have the 460R podium feet how long should the load bar be? Will a 60inch evo wing bar work? Since I dont have my cover...
Curt Echo In-Line & Trailer Connected Message on 2019 Ford Ranger When One Is Not
I purchased this controller recently Order #114272079 and installed it on my 2019 Ford Ranger Lariat with the factory tow package last night. It controls my trailer brakes fine and functions properly with the trailer connected. My problem is...
What Control Unit Comes With the Replacement Step, Motor, and Control for Kwikee 28 Series
Hello, Could you send me a picture of the wire harness? I currently have a Lippert Powerstep 353542 on my motorhome that I would like to replace with this unit. I am trying to determine if the electrical connects are the same, Thank you....
Trailer Wiring Harness Recommendation for a 1999 Ford Ranger
my truck does not have Tee conector will this work | Yes, the Curt Wiring Harness part # C55325 that you referenced would be the correct trailer wiring harness for your 1999 Ford Ranger that does not have the tow package wiring. I attached...
Hitch Availability for 2014 Subaru Crosstrek Hybrid
Hello, I have a 2014 Subaru Crosstrek HYBRID. I am looking at the curt receiver hitches and all 4 on your site have small yellow highlighted excluding hybrid. I want to explore if there are any receiving hitches that are suitable for my vehicle....
Is the Glass of the Longview Custom Towing Mirrors # CTM2200A Convex or Flat
I would order these mirrors if they are flat glass and not convex which distorts the distance. I want them to see exactly how far back cars are since I dont have use of my inside rear view mirror. | The mirror surfaces that are on the Longview...
Electrical Specs and Replacement Socket for Superwinch Terra Series Winches
What is the continuous amp rating of the solenoid and what control and socket do i need to use with it? | I spoke to my contact at Superwinch and he informed me that # SW87-42608 is not a continuous duty coil. The thermal current rating at...
Will Thule Hullavator Mount to Yakima OverHaul HD Ladder Rack?
Can the Thule hullavator kayak racks be mounted to the Yakima Y01151-58 overhaul ladder rack bars? Thanks | The Thule Hullavator Pro Kayak Carrier item # TH898 is 100 percent compatible and will mount directly to the crossbars of the Yakima...
Tonneau Cover And Ladder Rack Combo Options For 2020 Ford Ranger With 5 Foot Bed
Hi, I have a 2020 Ford Ranger Crew cab. I would like to get a hard folding top and rails for a rack on the back. Will the Lomax folding top work with the Truxedo Elevate TS Rails? Also, does the Yakima or Thule racks work with the Elevate TS...
EBike w/ Fenders Rack Compatibility
Hello, I need an ebike rack for 2 step through ebikes. They also have fenders, but I could take the front fender off. Also, are there any with a loading ramp? | The Thule Easyfold XT Bike Rack for 2 Electric Bikes - 1-1/4" and 2" Hitches,...
What Are the L Brackets on the Blue Ox 2689 Base Plate Used For During Installation
what are the L brackets with the nut welded for on the back side of unit??the tabs go into the front and these brackets are on the other end and protrude down? | The bracket at the rear of the Blue Ox Base Plate # BLU77XR is designed for the...
Parts Needed For Flat Towing a 2000 Ford Ranger Behind a Motorhome/RV
I need to flat tow a 2000 Ford Ranger, 3.0 V6, 4x4 w/ auto transmission electronic which has 2 wd, 4 wd low and 4wd high settings will the Curt 19745 fit a 2000 Ranger? I need to know what needs to be done to assure transmission is in neutral...
Only Right Turn Signal Works on Tow Package Wiring on a 2001 Ford Ranger
2001 Ranger - utility trailer with 4 prong flat connection Lights on trailer shorted out and evidentally messed up my truck setup. Tested at truck side of hook up: Rt turn signal works, tail lights and Lf turn signals do not. Ground must be...
How to Lock Curt 2 Bike Platform Rack for Fat Bikes C18085-FB
Is this rack lockable? | Curt's 2 Bike Platform Rack for Fat Bikes # C18085-FB includes an anti-rattle threaded hitch pin that will reduce motion of the rack in your hitch but this feature prevents use of a standard hitch lock. No worries though...
Can Primus IQ 90160 Brake Controller Install on 2019 Ford Ranger
I purchased a Primus IQ 90160 and wiring harness for a 2013 Honda Pilot. Before I was able to install it I traded the Honda for a 2019 Ford Ranger. My question is will the 90160 work on my Ford Ranger and if so which wiring harness do I need...
Camera System For Use With Off-Road Trailer
Hi - really value you guys and your research, so reaching out in general as opposed to this specific item. I have a Black Series HQ15 and am looking for the following capabilities: backup/rearview camera, side cameras that I can mount low...
Troubleshooting Broken Ground Pin on Trailer Wiring Harness for a 1994 Ford Ranger
Do they make a better harness than what is displayed on your web site. The ground post keeps breaking off, which I know how to bypass the plug to make it work. The other problem Im having is one of the turn signals will quit working. I will...
Spare Tire Bracket Relocation for Curt Class II Recevier on 2001 Ford Ranger
Will I still be able to use Spare Tire Mount with this Hitch Installed? | According to Curt Manufacturing, installing the Class II Receiver Hitch, part # 12012 will NOT require relocation of the spare tire bracket. Although not expressly mentioned...
Can I Retain My Spare Tire if I Install a Curt Hitch # 13138
Can I mount this hitch and still use Spare tire mount on 2001 Ford Ranger? | Yes, you can use this hitch on your 2001 Ford Ranger and still retain your factory spare tire mount. I attached installation instructions for this product below. You...
Replacement Mounting Brackets and Hardware For a 4" Oval Nerf Bar On 2020 Ford Ranger SuperCrew
I’m looking for the brackets and bolts to install a 4” Oval Nerf Bars to a 2020 Ford Ranger. I have the bars I need the brackets. | We do have the Replacement Installation Mounting Hardware # W98DF which will fit either the Black # W95KD or...
Wiring Up a 2021 Ford Ranger For Flat Towing, What Wires In The 6-Pin Do I Need?
I am installing the Demco Stay-n-play Duo in a 2021 Ford Ranger your videos on 2019 and 2020 Rangers are the same truck. For my 6pin outlet on the truck, from this HM47054 kit, what is the blueinch connection for? It says brake controller ...
Filter Your Search
Contact and Help